Chefman RJ11-17-GPT, Руководство пользователя

Страница: 15 / 20

12
MODEL: RJ11-17-GPT MODEL: RJ11-17-GPT
Troubleshooting
Problem Possible Cause Possible Solution
Kettle does
not boil
Kettle has become
disconnected Insert the plug into the
electrical outlet
Kettle is not properly
connected to base
Ensure that the Kettle is
properly inserted onto the
base
Kettle does not
work Kettle was turned on without
water and overheated
Allow the Kettle to cool and
fill with water. It should start
working in about 15 minutes
Water has an
unusual taste
Kettle is new
Spill out the water and boil
clean water. If this problem
continues, fill the Kettle with
water and two teaspoons of
baking soda. Bring the water
to a boil, let cool and pour out
water. Rinse with lukewarm
water
Kettle turns on
and switches off
immediately
There is not enough water in
the Kettle
Fill Kettle with at least .6 L
water so water reaches the
MIN fill line. Note: The Kettle
is equipped with Boil-Dry
Protection to protect your
Kettle from heating up when
there’s not enough water
Tea is a little
gritty The pour spout filter may
not be in place
Ensure pour spout filter is
in place. If it is not, attach
using the instructions on
page 10, step 4
E1
The temperature sensor is
damaged Contact Chefman Customer
Service
E2
Boil-dry protection indicator:
If the Kettle starts to heat
without enough water, it will
automatically turn off to avoid
any potential damage
Add at least .6 L water
to the kettle