5
6
MODEL: RJ11-17-GOPP
MODEL: RJ11-17-GOPP
MAX
1.7 L
1.0 L
0.5 L
MIN
BEFORE FIRST USE
Remove all packing materials and stickers from the inside and outside of the Glass Kettle.
Gently wipe down exterior with a damp cloth or paper towel. Rinse the inside with water.
Never immerse the kettle, its base, the cord or plug in water or any other liquids. The
electrical connections and the On/Off switch must never come into contact with water or
any other liquids.
Read all instructions and follow them carefully.
HOW TO USE
1. Wedge the power cord into the notch on the 360° swivel base. Place the base on a
flat, sturdy surface away from water splashes and any sources of heat. Plug cord into outlet.
2. Remove kettle from base if attached. Push lid release button and pull
backwards to raise lid. Fill with desired amount of water. Do not exceed the MAX fill line
(1.7 L), and do not fill below the MIN fill line (0.5 L)
NOTE:
Only use the Glass Kettle to heat water.
3. Push lid down to close and snap into place. Ensure that the lid is flush with the top
of the kettle.
4. Place the kettle onto the base. Ensure that both the Glass Kettle and base are steady
on the flat, sturdy surface.
5. Press the On/Off switch to turn the Glass Kettle on; the On/Off indicator light will
illuminate in blue. Small bubbles will begin to form in the water to indicate the water
is heating up, then large ones to indicate it’s boiling. Once the water comes to a boil,
the Glass Kettle and On/Off indicator light will automatically turn off.
CAUTION:
The Glass Kettle and water inside will be very hot. Handle with care. If
choosing to open the lid when there is hot water water inside, do so carefully. Hot steam
may escape.
6. Use the handle to lift the Glass Kettle off the base. Carefully pour into desired
vessel, i.e. cup, bowl, etc.
7. Return Glass Kettle to base. Press On/Off switch at any time to reheat water.
BOIL-DRY PROTECTION
If the Glass Kettle starts to heat without enough water, it will automatically turn off to
avoid any potential damage.
OPERATING INSTRUCTIONS
1
Glass Kettle
2
Stay-cool Handle
3
On/Off Switch
4
Hinged Lid
5
Lid Release Button
6
On/Off Indicator Light
7
360° Swivel Base
8
Plug
7
2
3
1
6
8
5
4
FEATURES
