7
6
1
•
888
•
557
•
3848
Wards.com
How to Use
1. Make sure the carafe lid is securely attached to the carafe.
2. Brew two carafes of fresh water (see the “To Brew Coffee” section) without
adding any coffee grounds.
NOTE: After brewing the first carafe of water, press the On/Auto/Off button twice
to turn the product off, wait ten minutes, then brew a second carafe of water.
3. Thoroughly clean the carafe, carafe lid, filter basket and mesh filter in hot,
soapy water; rinse thoroughly and let dry.
Before Using for the First Time
Parts & Features
Mesh Filter
Lid
Water
Reservoir
Filter basket
Carafe Lid
Carafe Handle
Control Panel
Carafe
Warming Plate
Measuring
Scoop
Water Level
Window
Control Panel
Red Light
On
Hour
On/Auto/Off
Auto
Green Light
Min
Program
To Set the Clock:
NOTE: The time will need to be reset if electrical power is interrupted.
1. Plug the power cord into a standard 120-volt AC electrical outlet.
2. Press the Program Button until “CLOCK” appears in
the upper right of the display (see Figure 2). Press and
release the “HOUR” and “MIN” Buttons until the correct
hour and minutes appear in the display.
NOTE: The “AM” or “PM” designation will appear to the left of the time
(as in Figure 2).
3. Press the Program Button twice to set the time. If no buttons are pressed, after
approximately 15 seconds, “CLOCK” will disappear from the display and the
clock will be set.
Figure 1
Figure 2
