Cheetah V860c, Инструкция по эксплуатации

Страница: 9 / 15

Set it as an optic S2
2
secondary unit.
Turn the Select Dial until < S2 >
blinks. Press the < > button to
confirm the settings.
●
Set it as the master unit.
2
Turn the Select Dial until
< > blinks. Press
the < SET > button to
confirm the settings.
< > and < > will
be displayed, meaning the flash
is set as the master unit.
●
●
Slave Unit Setting
Optic S2 Secondary Unit Setting
The flash can also function as an optic S2 secondary flash with
optic sensor in M manual flash mode. This is useful when cameras
have pre-flash function. With this function, the flash will ignore a
single “preflash” from the main flash and will only fire in response to
the second, actual flash from the main unit.
● S1 and S2 optic triggering is only available in M manual
flash mode.
Press < > button for 2
1
seconds or longer until the
icon in dotted lines blinks.
Master Unit Setting
- 15 - - 16 -
●
Even with multiple slave units, the master unit can control
all of them via wireless.
In this user manual, “master unit” refers to the camera flash
on a camera and “slave unit” will be controlled by the
master unit.
●
1
．
Wireless Settings
You can switch between normal flash and wireless flash. For normal
flash shooting, be sure to set the wireless setting to OFF.
Indoors
Outdoors
15m ( 49 . 2ft )
10m
(
32
.
8ft
)
80°
8m
(
26
.
2ft
)
12m
(
39
.
4ft
)
●
Any flash settings (of flash exposure compensation, high-speed
sync, FE lock, FEB, manual flash, Multi flash) on the master unit
will be automatically sent to the slave units. So the only thing you
need to do is to set the master unit to ETTL mode without any
operation for the slave units at all during the shooting.
●
This flash can work in ETTL autoflash, M manual flash, and Multi
stroboscopic flash modes when set as a master unit.
Positioning and Operation Range
Press < > button for 2
1
seconds or longer until the
icon in dotted lines blinks.
Optic S1 Secondary Unit Setting
In M manual flash mode, this flash can function as an optic S1
secondary flash with optic sensor. With this function, the flash will fire
synchronously when the main flash fires, the same effect as that by
the use of radio triggers. This helps create multiple lighting effects.
Set it as the slave unit.
2
Turn the Select Dial until
< > blinks. Press
the < SET > button to
confirm the settings.
< > and < > will
be displayed, meaning the flash
is set as the slave unit.
●
●
Press < > button for 2
1
seconds or longer until the
icon in dotted lines blinks.
Set it as an optic S1
2
secondary unit.
Turn the Select Dial until < S1 >
blinks. Press the < > button to
confirm the settings.
●
Press < > button for 2
1
seconds or longer until the
icon in dotted lines blinks.