August 2021
2
INSTALLATION AND USE
•
Place the unit on a firm, flat stable surface away from children and pets and other causes of
damage or disturbance.
•
Add the metal cap.
•
Connect the DC power supply lead to the base of the product.
•
Connect the power supply to the mains and switch on.
•
Allow the product 1 hour to warm up
•
Switch off after a maximum of 3 hours.
INFORMATION
For optimum effect use the product in a slightly darkened room
CHANGING THE LAMP
•
Disconnect the product from the power supply and allow the product to cool until the wax
has hardened. Do not touch the product or attempt to change the lamp while hot.
•
Remove the screw on the stem of the product and withdraw the glass pod. Careful place
this down in such a way it does not get damaged.
•
Remove the old lamp from its lamp base.
•
Carefully replace the lamp with a G4 12V 20W Bulb. Hold the envelope of the lamp with
tissue paper to stop grease and dirt getting on to the lamp.
•
Carefully replace the glass pod back into the base lining up the socket with the case hole.
Insert the retaining screw making sure it is in place and is securely holding the glass pod.
•
Put the unit back in to position and leave to settle before turning on.
CHANGING THE LAMP
Input: 230Vac @50Hz
Output: 12V 250ma
Lamp: G4 12V 20W (max)
Lamp: Oil based wax and Water
DISPOSAL AND RECYCLING
You must not dispose of this product with domestic household waste.
Most local authorities have specific collection system for electronic items and disposal is free of
charge to the end-user.
MAINTENANCE
•
Store in a dry clean space when not in use.
•
Disconnect from the mains supply when not in use
•
Allow the product to cool down and clean only with a slightly damp cloth
Electrovision Ltd., Lancots Lane, Sutton, St. Helens, Merseyside WA9 3EX
website: www.electrovision.co.uk
