Product Specification:
•
Power Supply: DC 12V
•
Operation temperature:
-
10⁰
-
30⁰ C (14⁰
-
86⁰ F)
•
Storage temperature:
-
20⁰
-
40⁰ C (
-
4⁰
-
104⁰ F)
•
Camera and sensors water resistance: IP67 rating
•
View Angle: 170 degrees
•
View Range: 0.1
-
9 m (0.3
-
30 ft.)
LCD Display:
•
Shows video captured by the rear view camera
•
Indicates the distance measured by the camera on screen
•
Provides distance guides to aid with reversing
•
Connected using red (power) and yellow or white (video) connectors
Rear
-
view camera & Proximity sensors:
•
Proximity sensors are integrated into the rear
-
view Camera
•
Connected using red (power) and yellow (video) connectors
Beeper:
•
The speed of beeps will change based on distance measured by the
camera.
•
Connected using a 2 pin connector to the camera
•
Can be disconnected when not needed
Mounting Stand:
•
Adjustable position to provide a comfortable and stable viewing angle
Package contents:
•
5" display monitor
•
Weatherproof rear
-
view Camera including proximity sensors
•
Beeper
•
Monitor mount stand
•
Connection cable with Power switch
•
2 x Crimp Free Butt Splice
•
4x Zip ties and adhesive Velcro pads
Ensure that monitor location will not obstruct neither view while driving
the wheelchair nor access to the joystick and/or other wheelchair control device.
The provided mounting stand might not fit to every type of wheelchair. The
display monitor can be mounted in various locations on the power wheelchair.
Consult your wheelchair manufacturer to be sure that installation and mounting
location you choose will not degrade the safety of any system or device on your
wheelchair.
Disclaimer:
Cheelcare and/or its affiliates are not responsible for a user
’
s intended or
actual use of the Rear
-
view camera with proximity sensors. In no event shall
Cheelcare and/or its affiliates have any liability for any losses (whether direct or
indirect, in contract, tort or otherwise) incurred in connection with the Rear
-
view camera with proximity sensors, including but not limited to damaged
property, personal injury and/or loss of life. Neither shall Cheelcare and/or its
affiliates have any liability for any decision, action or inaction taken by any
person in reliance on the Rear
-
view camera with proximity sensors, or for any
delays, inaccuracies and /or errors in connection with the Rear
-
view camera with
proximity sensors and its functioning. Cheelcare and/or its affiliates shall have no
responsibility or liability for damage and/ or injury resulting from accidents
occurring with the wheelchairs having the installed Rear
-
view camera with
proximity sensors and shall not be liable for any injury, loss or damage,
incidental or consequential, arising out of the use or intended use of the
product.
USER
MANUAL
Thank you
for purchasing the Cheelcare AWARE
-
A1 Universal Power Wheelchair
Rear
-
view System.
Please read the installation instructions BEFORE installing the product. Improper
installation will void manufacturer's warranty.
Do not apply to all types of power wheelchairs. Consult a technician if you are
experiencing any problems while installing the product. You can contact Cheelcare at
(647) 800
-
2680 to speak to one of our installation specialists if you have any specific
questions regarding your Universal Power Wheelchair Rear View System. You can also
review additional information on installation and safety at www.cheelcare.com.
Please read the safety information BEFORE using the product. ALWAYS use the
product as outlined in this user manual.
AWARE
-
A1
The AWARE
-
A1 Universal Rear
-
View System is powered by connecting
the XLR 3 pin plug to the charging port of your power wheelchair .
Contact your power wheelchair manufacturer to ensure that this
connection will not void existing product warranty. You have the option of
choosing Cheelcare AWARE
-
A2 and AWARE
-
A4 for different connection
options. Please note that the price of the different options is not the same.
Installation Guide:
1.
Screw and secure the display monitor mount stand to the wheelchair armrest tube.
2.
Install monitor display to the top of the mounting hardware. Apply pressure until a
click is heard to ensure the monitor is tight and secured onto the mount.
3.
Adjust and tilt mounting angle as preferred to achieve better viewing angle. Then
secure the angle by tightening the screw knob.
4.
Screw on and camera stand and Install rear
-
view camera on top of wheelchair
frame, behind backrest, to achieve maximum viewing angle. Use zip ties provided or
other methods to secure the camera
Connection guide:
Only connect the system to a 3 pin XLR female charging port.
1.
Connect the connectors coming out of the switch box, to the connectors of the
same color of the monitor
2.
Connect the connectors on the other end of the long wire to the same color
connectors of the camera. It is recommended to first install the camera onto the
vehicle, then connect the wires.
3.
Connect the XLR 3 pin plug to your power wheelchair charging port.
4.
Test the system. If there is a problem check the connections.
AWARE A1 connection guide:
