UM-130_WG-01_IS0
SAFE USE AND MAINTENANCE INSTRUCTIONS
WG-01
–
WORM GEAR WINCH Issue 0
Checkmate Lifting and Safety Ltd reserve the right to alter or amend the information contained in this instruction booklet
without notification. Always check with Checkmate Lifting & Safety Ltd that your version is the latest issue. 27/02/2017
3
1.
DO’S
GENERAL
Always read the instruction manual carefully and follow all recommendations. This
manual must be provided to the rescuer. Only Checkmate genuine parts are
permitted for the repair or service of this winch. Keep this manual with the device at
all times, and never discard this manual. If used in the hire industry and there are any
concerns with the use of this device, always seek clarification from the Checkmate
reseller. Copies of this manual are downloadable from www.checkmateuk.com.
INSTALLATION
The Checkmate WG-01 should always be installed by a competent and trained person.
You should always ensure a complete risk assessment and method statement is
carried out and recorded and suitable rescue planning is considered if being used in
conjunction with Fall Protection equipment.
COMPATIBILITY
When making connections with WG-01, eliminate all possibility of roll-out. Roll-out
occurs when interference between a hook and the attachment point causes the hook
gate to unintentionally open and release. All connections must be selected and
deemed compatible with WG-01 by a Competent Person. All connector gates must be
self-closing and self-locking, and withstand minimum loads of 3,600 lbs. See the
following for examples of compatible/incompatible connections:
