Checkline TI-007X Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 40

Checkline TI-007X Скачать руководство пользователя страница 30

–29 –

8.5 Units

The TI-007X will operate in both English (inches) or Metric (millimeters) units.

The procedure to select the units is outlined as b

elow:

1. Press the

key to access the menu items/features.

2. Use the

and

keys to scroll through the items/features until the
UNIT feature is being displayed.

3. Press the

key to edit the units setting. The edit icon will be illuminated and

flashing.

4. Use the

and

keys to toggle English or Metric units.

Note

: Pressing the

key prior to pressing the

key will abort to the

measurement screen without saving changes.

5. When the desired UNIT setting is displayed, press the

key to set the units

and return to the measurement screen.

8.6 Light

The TI-007X uses a custom glass segmented display that is equipped with a backlight
for use in low light conditions. The options are on/off/auto, where the auto setting
only lights the display when the gauge is coupled to the material and receiving a
measurement.

The steps below outline how to toggle the options:

1. Press the

key to access the menu items/features.

2. Use the

and

keys to scroll through the items/features until the
LITE feature is being displayed.

3. Press the

key to edit the light setting. The edit icon will be illuminated

and flashing.

4. Use the

and

keys to toggle status on/off/auto.

Note

: Pressing the

key prior to pressing the

key will abort to the

measurement screen without saving changes.

5. When the desired

LITE

setting is displayed, press the

key to set the status

and edit the BRT (brightness) option.

«
...
28
29
30
31
32
...
»

Содержание TI-007X









































Отзывы:

Нет отзывов