POWER UP YOUR CHECK POINT
TE100X/TE250X/TE1000X/TE2000X APPLIANCE
CONNECT YOUR PC FOR
INITIAL SETUP
•
Connect the power cable to the power port on the TE100X/TE250X/TE1000X/
TE2000X appliance rear panel and plug it into a power outlet.
•
Turn the power on.
•
Initial setup must be done from a PC connected to the appliance’s MGMT
interface via the included Ethernet cable. After completing the initial
connection, the First Time Configuration Wizard will guide you through the
process of configuring the appliance.
•
Before continuing, make sure your PC is configured correctly.
1
2
