Check Point Smart-1 205, Руководство по началу работы

Страница: 44 / 114

Hardware Diagnostic Tool and Restoring Factory Defaults
44 | Smart-1 205/210 Appliances Getting Started Guide
2. Connect to the appliance using a terminal emulation program such as Microsoft
HyperTerminal or PuTTY.
a) Configure the terminal emulation program:

In the HyperTerminal
Connect To
window, select a port from the
Connect
using list.

In PuTTY select the
Serial
connection type.
b) Define the serial port settings: 9600 BPS, 8 bits, no parity, 1 stop bit.
c) From the
Flow control
list, select
None
.
3. Reboot or turn on the appliance.
4. When this message shows, hit any key to activate the
Boot
menu. You have about
four seconds.
Press any key to see the boot menu [Booting in 5 seconds]
5. From the Boot menu, select
HW Diagnostics
6. Press Enter .
To Run the Diagnostic Tool from the LCD Panel keys:
1. Reboot or turn on the appliance.
2. When the countdown begins, press any of the arrow keys. You have about four
seconds.
3. From the Boot menu, select HW Diagnostics
4. Press Enter .