Procedure for Smart-1 600-M Appliances
Quantum Smart-1 600-M/6000-L/6000-XL Appliances Replacing Line Cards | 10
7.
Put the Electrostatic Discharge (ESD) grounding strap on your wrist and attach the other end to a
grounding point.
8.
Remove the appliance cover:
a.
Use a 1/4 inch flat head or a Phillips #2 screwdriver to turn the lock counter clockwise to the
unlocked position (1).
b.
Open the release latch until the system cover slides back (2).
c.
Lift the cover from the system (3).
Removing the Riser
1.
Open the blue expansion card riser retention latch located on the appliance (1).
2.
Holding the blue touch points (2), lift the expansion card riser from the appliance.
Note
- The illustration shows a riser with only the onboard NIC installed.
