Check Point Power-1 11000 Скачать руководство пользователя страница 5

Страница: 5 / 6

The warranty sticker covers an appliance cover screw.

3. Clearly write this information on the sticker:



Date of upgrade.



Current RAM memory and LOM card configuration of the appliance.

Removing Memory DIMMs

Make sure that you prepare the appliance before you remove memory DIMMs. For more
information, see Preparing the Appliance.

To remove memory DIMMs from the appliance:

1. Put on the ESD strap and attach the other end to a grounding point.

2. Press the two retaining clips outward.

3. Carefully pull the DIMM up.

Only touch the rear corners of the DIMM. Pressing on the heat sink or other DIMM
components can damage the hardware.

If necessary, pull one end of the DIMM, then the other, to gradually release it from the
contact pins.

4. Replace the plastic fan cover above the DIMMs.

Important

- Make sure that there are no leftover parts inside the appliance.

Содержание Power-1 11000

Страница 3: ...sockets on the system board The basic memory configuration of the appliance ships with six DIMMs installed 2 Remove all the memory DIMMs from the appliance 3 Press on the two white retaining clips outward 4 Align the new DIMM above the socket Only touch the rear corners of the DIMM Pressing on the heat sink or other DIMM components can damage the hardware ...

Страница 6: ...t tightening the appliance cover screws b Connect the power cords to the appliance c Turn on the appliance using the power switch at the rear of the appliance d Make sure that the LCD screen shows the appliance model 6 Tighten the two appliance cover screws to secure the cover on the appliance ...