Check-line LS-5-12000 Скачать руководство пользователя страница 5

8.0 W

ARRANTY

ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original 
purchaser  that this product is of merchantable quality and confirms in kind and quality
with the descriptions and specifications thereof. Product failure or malfunction arising
out of any defect in workmanship or material in the product existing at the time of 
delivery thereof which manifests itself within one year from the sale of such product,
shall be remedied by repair or replacement of such product, at ELECTROMATIC’s
option, except where unauthorized repair, disassembly, tampering, abuse or 
misapplication has taken place, as determined by ELECTROMATIC. All returns 
for warranty or non-warranty repairs and/or replacement must be authorized by 
ELECTROMATIC, in advance, with all repacking and shipping expenses to the address
below to be borne by the purchaser.

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE 
WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR
PURPOSE OR APPLICATION. ELECTROMATIC SHALL NOT BE RESPONSIBLE
NOR LIABLE FOR ANY CONSEQUENTIAL DAMAGE, OF ANY KIND OR
NATURE, RESULTING FROM THE USE OF SUPPLIED EQUIPMENT, WHETHER
SUCH DAMAGE OCCURS OR IS DISCOVERED BEFORE, UPON OR AFTER
REPLACEMENT OR REPAIR, AND WHETHER OR NOT SUCH DAMAGE IS
CAUSED BY MANUFACTURER’S OR SUPPLIER’S NEGLIGENCE WITHIN ONE
YEAR FROM INVOICE DATE.

Some State jurisdictions or States do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation may not apply to you. The duration 
of any implied warranty, including, without limitation, fitness for any particular purpose
and merchantability with respect to this product, is limited to the duration of the 
foregoing warranty. Some states do not allow limitations on how long an implied 
warranty lasts but, not withstanding, this warranty, in the absence of such limitations,
shall extend for one year from the date of invoice.

ELECTROMATIC Equipment Co., Inc.

600 Oakland Ave. Cedarhurst, NY 11516—USA

Tel: 1-800-645-4330/ Tel: 516-295-4300/ Fax: 516-295-4399 

Every precaution has been taken in the preparation of this manual. Electromatic Equipment Co., 
Inc., assumes no responsibility for errors or omissions. Neither is any liability assumed for damages 
resulting from the use of information contained herein. Any brand or product names mentioned 
herein are used for identification purposes only, and are trademarks or registered trademarks of their
respective holders

Содержание LS-5-12000







Отзывы: