Check box HSv625, Инструкция по установке и эксплуатации

Страница: 16 / 40

16
PermaCode
PermaCodes are special Access Codes you can define yourself. Usage is similar to
ticket numbers, but these codes are reusable by multiple guests at the same time. You
may change PermaCodes at anytime, and any guest devices previously activated will
still remain activated until the time set for their code has expired. PermaCodes are great
for group events or special promotions and can save the need for printing and
distributing large amounts of tickets for one time events.
You can have two different codes
defined, with different amounts of
access time assigned to each code.
To set up PermaCodes click on the
Access Controls button on the top
level menu, and then select the
PermaCode button on the drop down
menu. If you have two Guest Networks
make sure you select the Guest
Network you want to create tickets for.
Create your code word(s) and select
the amount of time each code word is
valid for and press update.
Guests now need to simply type the
code into the box on the welcome page,
and they will be let on-line for the
amount of time assigned to each code.
PermaCodes can consist of letters and
numbers, but not spaces or special characters. To make it easier for your guests
PermaCodes are not case sensitive.
Room Prompt Setup
No matter if you use Free Access, Tickets or PayPal you can also require users to list their
room, site or boat slip location using Room Prompt.
Selecting Room Prompt adds a second box to the welcome page that the guest must enter
information into and the information entered will be listed on the Active Clients Screen next
to the user.
To enable the Room Prompt, go to Customize Site then Room Prompt Setup. Select
Enabled to turn on room prompts, and
optionally you can change the text that
appears above the prompt box.
If you
have two Guest Networks make sure
you select the Guest Network you
want to create tickets for.
Once Room prompts are enabled, in
addition to clicking Free access,
entering a ticket or PermaCode, uses
will be required to enter something into