Checchi & Magli WOLF PRO, Руководство по эксплуатации и обслуживанию

Страница: 30 / 38

English language Use and maintenance
26
INFORMATION FOR USE
6
Prolonged disuse of the work vehicle
If the work vehicle is not due to be used for long periods,
proceed as follows.
1) The machine thoroughly, taking care to remove any
chemical or fertiliser residues (see “Machine clean-
ing”).
2) Check the condition of the all the machine’s parts
and replace any that are worn or damaged.
3) Check that the screws are correctly tightened.
4) Grease to all the unpainted parts.
5) Grease the parts that require lubrication (see “Lubri-
cation points diagram”).
6) Park the machine carefully on flat ground in a dry
area protected from the weather.
7) Leave enough room around the work vehicle for the
hitching up and unhitching manoeuvres.
Safety advice for maintenance
Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary maintenance envisaged in the instruction manual.
Special maintenance operations require a special-
ised workshop on the premises which meets the
requirements specified by the relative laws in force
(appropriate equipment suitably trained staff etc.);
if you do not have a compliant workshop, contact an
authorised one.
Maintenance interval schedule
To guarantee constant, efficient and safe machine op-
eration, ensure all the maintenance envisaged by the manufacturer is carried out.
Interval Component Type of work Manual reference
Every work
day
Drilling cups Cleaning Drilling cup cleaning
Lift frame Integrity check
Guards Integrity check Guards
Warning and hazard plates Inspection Information and safety signs
Every 50
hours of work
Machine components Greasing Lubrication diagram
Nuts and bolts Tightening inspection
Nuts and bolts tightening torques
chart
Every 150
hours of work
Tyres Check Tyre check
Drilling cup cleaning
Clean the moving parts of the drilling cups to remove any product residues so that the cups can move freely.
Tyre check
Check the tyres for wear and if they feature tears or signs
of ageing, they must be replaced.
Check tyre pressure and restore if necessary (see “Speci-
fications” schedule). The pressure must be checked with the weight of the
work vehicle entirely on the ground and with nothing
and nobody on the work vehicle (people or things).
7
MAINTENANCE INFORMATION