MP-KBD
MIDI Interface for Mono / Poly Keyboard
Model 8-433 ver. 1.0
Copyright © 2008 CHD Elektroservis
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
4
Electrical connection of interface in the instrument
2.1. RELEASING OF THE INSTRUMENT COVER
a) Unscrew the three screws from the bottom of the instrument (pic. 1-1) and four screws on the
front panel (pic. 1-2). Keep the screws. They will be used again after the MIDI kit installation.
b) Lift off carefully the instrument front panel (pic. 1-3).
Pic. 1-1
Pic. 1-2
Pic. 1-3
2.2. MIDI-IN CONNECTOR INSTALLATION
There are three ways of the MIDI-In connector installation possible.
If you do not like to mechanically damage the front cover of the instrument, take out the MIDI cable
through the slot near the left side for example (see pic. 2-1).
