CHD Elektroservis 8-437, Руководство по установке, Страница: 4 / 20

SH2/9-M
MIDI Interface for Roland SH-2 / SH-09
Model 8-437 ver. 1.0, 2.0
Copyright © 2017 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
4
Pic. 1.1.1 – Parts of interface kit
The SH2/9-M interface kit delivery contents :
1. MIDI Interface board
2. 2x DIN-5 socket with cable
3. Bunched cables with tumbler switch and LED
4. Power supply bunched cable (4-wire)
5. Signal bunched cables (10-wire)
6. Coupling elements (screws, nuts, washers, LED holder, tightening strips, insulation tubes …)
7. CD-ROM with support software and manuals in PDF form
8. 3x manual in printed form
2. MIDI INTERFACE INSTALLATION
Mounting of the interface in the Roland SH-2 / SH-09 synthesizer is very easy. If you follow the
instructions from this manual, there should be no major problems during the installation. The interface
installation procedure is thoroughly described in the following chapters. Please follow these
instructions accurately to avoid any damage of the instrument.
Attention! Disconnect the instrument form the mains prior to the installation. There is
a risk of the electric shock!
Attention! Observe precautions for handling electrostatic discharge sensitive devices!
The producer is not responsible for any eventual mechanical or electrical damage of
the SH-2 / SH-09 instrument caused by the infringement of the described installation
procedure or by careless manipulation during the installation of the MIDI interface!
It is recommended to calibrate the SH-2 / SH-09 accordingly to the instructions in
service manual of the instrument prior the interface installation. This ensures trouble-
free operation of the interface.