CHD Elektroservis 8-435, Руководство пользователя, Страница: 9 / 16

P61-KBD
MIDI Interface for Korg Poly.61 Keyboard
Model 8-435 ver. 1.0
Copyright © 2018 CHD Elektroservis.
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
9
Table 4 Table 4 Table 4 Table 4 – –– – Conversion of CC #17 value to ”Key Priority“ parameter value Conversion of CC #17 value to ”Key Priority“ parameter value Conversion of CC #17 value to ”Key Priority“ parameter value Conversion of CC #17 value to ”Key Priority“ parameter value
CC Priority CC Priority
0 ~ 31 Last 64 ~ 95 Lower
32 ~ 63 Higher 96 ~ 127 None
CC #18
CC #18 CC #18 CC #18 – –– – Own contr Own contr Own contr Own controller: Pitch Bend Range oller: Pitch Bend Range oller: Pitch Bend Range oller: Pitch Bend Range
Received value of the CC #18 adjusts the “Pitch Bend Range“ parameter (see chapter 2.4). Conversion of the CC
#18 value to the parameter value shows table 5. Value of the parameter in edit buffer is adjusted only
temporarily - until next instrument restart.
Table 5 Table 5 Table 5 Table 5 – –– – Conversion of CC 18 value to ”Pitch Bend Range“ parameter value Conversion of CC 18 value to ”Pitch Bend Range“ parameter value Conversion of CC 18 value to ”Pitch Bend Range“ parameter value Conversion of CC 18 value to ”Pitch Bend Range“ parameter value (in semitones) (in semitones) (in semitones) (in semitones)
CC Range CC Range CC Range CC Range CC Range
0 ~ 4
±
0 25 ~ 29
±
5 50 ~ 54
±
10 75 ~ 79
±
15 100 ~ 104
±
20
5 ~ 9
±
1 30 ~ 34
±
6 55 ~ 59
±
11 80 ~ 84
±
16 105 ~ 109
±
21
10 ~ 14
±
2 35 ~ 39
±
7 60 ~ 64
±
12 85 ~ 89
±
17 110 ~ 114
±
22
15 ~ 19
±
3 40 ~ 44
±
8 65 ~ 69
±
13 90 ~ 94
±
18 115 ~ 119
±
23
20 ~ 24
±
4 45 ~ 49
±
9 70 ~ 74
±
14 95 ~ 99
±
19 120 ~ 127
±
24
3.1.3 3.1.3 3.1.3 3.1.3 PITCH BEND PITCH BEND PITCH BEND PITCH BEND (PITCH (PITCH (PITCH (PITCH WHEEL) WHEEL) WHEEL) WHEEL)
"Pitch Bend" ("Pitch Wheel") command has a standard function - it changes the tune
7 77 7
of the notes played
8 88 8
. The
minimal / maximal range of the tune bend is adjusted by the "Pitch Bend Range" parameter from ±0 to ±24
semitones (see chapter 2.4).
3.2 3.2 3.2 3.2 COMMON SYSTEM COMMAND COMMON SYSTEM COMMAND COMMON SYSTEM COMMAND COMMON SYSTEM COMMAND ---- RESET RESET RESET RESET
The interface uses only "Reset" Common System MIDI command. All other Common System commands are
ignored.
Complete interface reset is done after receiving the “Reset“ command – all parameters are set to their default
values stored in internal memory.
3.3 3.3 3.3 3.3 SYSTEM EXCLUSIVE MESSAGES SYSTEM EXCLUSIVE MESSAGES SYSTEM EXCLUSIVE MESSAGES SYSTEM EXCLUSIVE MESSAGES
System Exclusive communication enables the user to adjust values of all interface parameters in internal
interface’s permanent memory (see
④ ④ ④ ④
on pic. 1 and chapter 4.2) or in edit buffer (see
③ ③ ③ ③
on pic. 1 and chapter
4.1).
System Exclusive communication is described in detail in standalone manual.
For easier creation of SysEx messages, please use the software generator available at manufacturer’s web
pages: www.chd
www.chd www.chd www.chd----el.cz el.cz el.cz el.cz
7
Since the interface does not have direct access to the control voltage (CV) of the tone generators, the tone is not detuned is not detuned is not detuned is not detuned
continuously
continuously continuously
continuously but in semitone steps. Together with the tuning changes, the envelope generators are trigged.
8
The Pitch Bend command is valid only for tones activated by MIDI Notes. It doesn’t work with tones activated from own
keyboard of the instrument.