
Spectral Ring Modulator
Module 7-701 v. 1.0
Copyright © 2014 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
7
6. TECHNICAL PARAMETERS
Mechanical dimensions
Module width :
8 HU (40,3 mm)
Module height :
3 U (128,5 mm)
Module site depth :
35 mm (without power supply cable)
Power supply
Supply voltage :
±
12 V from the system bus
Current requirement : max +15 mA / +12 V
max -15 mA / -12 V
Inputs / outputs
Inputs :
CARRIER min
±
2,5 V
PP
for full driving / Z
IN
= 10 kΩ
MODULATION min
±
2,5 V
PP
for full driving / Z
IN
= 10 kΩ
Outputs :
RING max
±
5 V
PP
/ Z
OUT
= 200 Ω
MIX max
±
5 V
PP
/ Z
OUT
= 200 Ω
Accessory
Ribbon power supply cable with 10 / 16 pin connectors, length ca 200 mm
7. WARRANTY CONDITIONS
The equipment is provided with
thirty-month warranty
starting from the date of the equipment
take-over by the customer. This date must be specified on warranty list together with dealer's
confirmation. During this period of time, all defects of equipment or its accessories, caused by
defective material or faulty manufacturing, will be removed free of charge. Warranty repair is
asserted by the customer against the dealer. Warranty period is to be extended for the time period,
during which the product was under the warranty repair. The relevant legal regulations take effect
in case of cancellation of purchase contract.
The customer will lose the right for free warranty repair, if he will not be able to submit properly
filled out warranty list or if the defects of the product had been caused by:
•
unavoidable event (natural disaster),
•
connecting the device to the incorrect supply voltage,
•
inputs or outputs overloading by connecting the signals source or load source with not-
corresponding characteristics etc.,
•
faulty equipment operation, which is at variance with the instructions referred-to in the operating
manual,
•
mechanical damage caused by consumer during transportation or usage of equipment,
•
unprofessional interference with the equipment or by equipment modification without
manufacturer’s approval.
Содержание 7-701
Страница 1: ...7 Module 7 701 v 1 0 USER GUIDE 2014 CHD Elektroservis...
Страница 8: ...7...