Page 15
shown below.
Click
Settings/Developer options/USB debugging
to make sure this function is switched on. After USB
data cable is connected with PC, wait until the
Allow USB debugging
dialogue pops up, click OK.
You can also use third party software to manage the documents and data stored in LT700 and install
software like GNSS Tool into it.
4.8.
U
SE
C
AMERA
Make sure that the battery is charged and installed in the receiver.
Click to start recording the video, click again to finish.
Click to take a photo.
Slide fingers in the left column to switch between 5 different modes:
Normal mode
PIP mode
Live photo mo:
Panarama mode
Multi angle view mode
