Page 20
7.
G
ETTING
S
TARTED
W
ITH TOPO
X
PLORE
1. Run TopoLynx topoXpore
→ create a new map or open a exist
map.
2. Tap
icon → [Status].
3. Tap [Set] → configure corresponding [Port] and [Baud Rate].
o
For LT500H: [COM: COM 6] → [Baud Rate: 115200]
o
For LT500T: [COM: COM 6] → [Baud Rate: 38400]
4. When the software works with the device successfully, you will see the
SkyPlot in GNSS Status interface.
5. Also, the coordinate information will be shown in the lower right corner
of the main interface.
