Page 13
7. O
UTPUTTING
NMEA 0183
DATA FROM THE
9-
PIN PORT
The LT400HS can output the default NMEA 0183 V2.2 messages at 1Hz:
GPGGA, GPGSA, GPGSV, GPGST, GPRMC.
1.
Go to Start menu --> Settings --> System
2.
Select External GPS icon
3.
On the Software port tab: select COM6
4.
Then on the Hardware port tab: select COM3 and Baud: 57600
To set NTRIP Connection if required, run GNSSViewer:
1.
Select BoardType-->NovAtel, GPS Port-->COM6, and BaudRate-->57600,
press OK.
2.
Go to Config-->Ntrip-->Ntrip Client-->Config, input the IP, Port, Account,
Password and click OK to finish.
3.
Click Start to update SourceTable, after successful connection, choose
the relevant source table, Click Start, when data comes, minimize
GNSSViewer.
To output NMEA data on serial port, run the GpsGate application:
1.
Go to Settings-->Input, click Settings, choose Com6 and 57600, press
OK to return.
2.
Click Open to start data.
3.
Go to Output-->Add output, select from list and click, choose COM Port,
click Add, set COM4 and 57600, leave other settings as default, click Ok
to return.
4.
NMEA0183 data are now stream from the 9 pin COM port.