33
AUTO range selection, automatic (default) or manual: Range + or Range -
“Active” protection by PTC thermistor
Maximum open-circuit Voltage: 1V typ., 4V max.
Use the REL function for values <10% of the range in order to restore the residual zero
(compensation for the capacitance of the leads)
For measurements <10nF, a shielded lead is recommended. For a 2-wire link, use
very short wires (<25cm) and twist them together. Use the REL function to compensate
for the error introduced by the measurements leads. In REL mode, changes of range are
not available.
Temperature
5.9.
5.9.1.
Connecting the multimeter
Connecting Pt100/Pt1000
Connecting a K or J thermocouple with the temperature compensated plug (optional)
