Thermal Imaging Camera C.A 1879
English
Page 12 sur 22
♦
Temp profile :
. Select “Horizontal” or “Vertical” to enable a histogram of temperature values along a horizontal
or vertical cross section to be displayed on the right hand side of the display. The position of the cross
section is indicated by small arrows at the left and right or top and bottom of the image and can be adjusted
by means of Hotkey 1 and the navigation buttons.
♦
Temp alarms :
. Select “High”, “Low”, or “High & Low”. Visual and audio alarms will be triggered if either cursor
or a point within the designated area is higher or lower than a set temperature. The high and low set
temperatures may be adjusted by means of Hotkey 1 and the navigation buttons.
6.3.
Camera settings
♦
LCD brightness :
Select from 1 (low) to 9 (high) to control the screen brightness to save battery power.
♦
Caption mode :
Select “On” to enable the addition of a text caption when saving an image. Options will then be displayed
when saving an image, to be selected by means of Hotkey 2 and hotkey 3.
♦
Auto off :
Select “5 Mins”, “10 Mins”, “20 Mins” to allow the camera to switch itself off after a defined period of inactivity
in order to save power. There is also an “Always On” option.
♦
Camera reset :
Select with Hotkey 3
to restore the factory settings
