Data Logger Model DL913 & DL914
13
3. SETUP
3.1 BATTERY CHARGING
The instrument is powered via external USB connection or internal rechargeable
batteries. To ensure that recordings continue to completion when external power
is interrupted, we recommend fully charging the batteries before operating the
instrument as explained below.
1. With the instrument disconnected from USB power, press to turn the
instrument ON.
If it does not turn ON, the batteries are depleted and must be charged.
Use the provided USB cable to connect the instrument to an external power
source. The instrument will immediately turn ON.
If the batteries are depleted, skip step 2 below and continue with step 3.
2. Check the battery indicator.
If the indicator is full (
), the battery is fully charged. You can skip the
remainder of this procedure.
If the indicator is partially full (
), connect the instrument to an external
power source via the USB cable.
3. While the instrument is running on external power, the battery will charge.
The battery indicator will blink to indicate that the battery is charging. If
depleted, the battery will fully charge in approximately 10 hours without
Wi-Fi enabled. If WiFi is enabled then charge time will be doubled to 20 hours.
4.
To check the battery charging status, use the Left ◄ or Right ► button to
select Information mode
.
5.
Use the Up ▲ or Down ▼ button to display the Battery Status (BAT) screen.
This screen displays the following parameters:
1. Charging current
2. Charging voltage
3. Battery voltage
6. When the battery is fully charged, the battery indicator will stop blinking and
appear completely filled.
1
2
3
Содержание AEMC DL913
Страница 1: ...Data Logger Models DL913 DL914 User Manual ENGLISH DATA LOGGERS WITH AEMC INSTRUMENTS ...
Страница 34: ...NOTES ...
Страница 35: ...NOTES ...