Page 18 of 80
Swarm™ 4 FX User Manual Rev. 1
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller. The product uses 3-pin DMX
cable.
Connect the product to a suitable power outlet.
1.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket
2.
on the product.
DMX Personality
and Starting
Address
When selecting a DMX starting address, always consider the number of DMX channels used by
the fixture. If you choose a starting address that is too high, you could restrict the access to
some of the product’s channels.
The Swarm™ 4 FX uses up to 12 DMX channels in the 12-channel mode,
12CH
, which means
the highest recommended DMX address for that personality is
501
.
The Swarm™ 4 FX uses 2 DMX channels in the 2-channel mode,
02CH
, which means the
highest recommended DMX address for that personality is
511
.
If you are not familiar with the DMX protocol, download the DMX Primer from
http://www.chauvetlighting.com/downloads/DMX_Primer_Rev6_WO.pdf
.
To select the DMX personality and starting address, do the following:
Press
<MENU>
repeatedly until
d001–d511
shows on the display.
1.
Press
<ENTER>
and
02CH
or
12CH
will show in the display
2.
Use
<UP>
or
<DOWN>
to select the DMX personality.
3.
Press
<ENTER>
and
d001–d511
(for
02CH
) or
d001–d502
(for
12CH
) will show on the
4.
display.
Use
<UP>
or
<DOWN>
to select the DMX personality.
5.
Press
<ENTER>
.
6.
The display will continue to blink until the fixture receives a DMX signal.
Содержание Swarm 4FX
Страница 9: ...Swarm 4 FX User Manual Rev 1 Page 9 of 80 Laser Safety Label Reproduction Front Rear Bottom ...
Страница 12: ...Page 12 of 80 Swarm 4 FX User Manual Rev 1 Dimensions 11 4 in 290 mm 14 2 in 360 mm 4 2 in 107 mm ...
Страница 37: ...Manual de Usuario Swarm 4 FX Rev 1 Página 37 de 80 Dimensiones 11 4 in 290 mm 14 2 in 360 mm 4 2 in 107 mm ...
Страница 63: ...Manuel d Utilisation Swarm 4 FX Rév 1 Page 63 sur 80 Dimensions 11 4 in 290 mm 14 2 in 360 mm 4 2 in 107 mm ...
