Page 11 of 16
STRIKE P38 User Manual Rev. 1
Operation
Master/Slave
The Master/Slave mode allows a group of STRIKE P38 products (the slaves) to simultaneously duplicate
the output of another STRIKE P38 (the master) without a DMX controller. To set each of the slaves:
1.
Go to the
Master/Slave
main level.
2.
Select
Slave
.
To set the master:
1.
Go to the
Master/Slave
main level.
2.
Select
Master
.
3.
Select a static setting.
Dimmer Profiles
This setting determines how fast the output of the STRIKE P38 changes when you modify the output value.
This setting provides four different options to simulate the dimming curve of an incandescent lighting product.
1.
Go to the
Dimmer Mode
main level.
2.
Select a dimmer curve (
Off
,
Dimmer 1
,
Dimmer 2
, or
Dimmer 3
).
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the STRIKE P38.
1.
Go to the
LED Frequency
main level.
2.
Select PWM Frequency (
600Hz
,
1200Hz
,
2000Hz
,
4000Hz
,
6000Hz
, or
25Khz
).
Back Light
This setting allows for selection of the amount of time the backlight on the STRIKE P38’s display stays on
after the last button is pressed on the control panel.
1.
Go to the
Back Light
main level.
2.
Select
On
(remains on),
10S
(10 seconds),
20S
(20 seconds), or
30S
(seconds).
System Information
This option displays the total number of hours the product has run, the installed software version, and the
product’s UID.
1.
Go to the
Information
main level.
2.
Select
Fixture Hours
,
Version
, or
UID
.
Factory Reset
This option restores the STRIKE P38 to factory default settings.
1.
Go to the
Reset Factory
main level.
2.
Select
No
or
Yes
.
•
The master is the one that runs a program whether in Auto or Static mode.
•
Do not connect a DMX controller to the products configured for Master/Slave operation.
The DMX controller may interfere with signals from the master.
•
The master should be the first product in the daisy chain.
Off
: The output is proportional (linear) to the dimmer channel value.
Dimmer 1-3
: The output follows the dimmer value based on the corresponding dimmer
curve, DIM1 being the fastest.
Содержание STRIKE P38
Страница 1: ...User Manual ...
