
STRIKE™ 882 QRG
EN
3
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during
periods of non-use completely disconnect the product from power via
breaker or by unplugging it.
Power Linking
You can link up to 3 STRIKE™ 882 products at 120 V, 5 products at 208 V,
or 6 products at 230 V. Never exceed this number. Power linking cords can be
purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
1.
Disconnect this product from power.
2.
Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3.
Remove blown fuse and replace with a good fuse of the same type
and rating.
4.
Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The STRIKE™ 882 will work with a DMX controller using a regular DMX
serial connection. A DMX Primer is available from
www.chauvetprofessional.com
.
DMX Connection
The STRIKE™ 882 uses a regular DMX data connection for its DMX
personalities:
1 Ch
,
5 Ch
,
6 Ch
, and
10 Ch
. See the User Manual to connect
and configure for DMX operation.
Master/Slave
Connection
The STRIKE™ 882 uses the DMX data connection for its Master/Slave
mode. See the User Manual to connect and configure for master/slave
operation.