Chauvet Slim Par Pro TRI, Руководство пользователя, Страница: 12 / 21

4. Operating Instructions
12 6/24/2013 11:35 AM
Standalone
This fixture has several options for operating without a DMX controller. Access these options via the
control panel on the back of the fixture.
Automatic
This fixture has preprogrammed chases that may be triggered without a controller. Access these
chases via the control panel on the back of the fixture.
Please see the instructions below for details on entering this mode.
1. Remove any DMX controller from the fixture.
2. Press
<MENU>
to select Auto Program (
P--
).
3. Press
<ENTER>
.
4. Using
<UP>
&
<DOWN>,
select one of the five programs.
5. Press
<ENTER>
.
6. Press
<MENU>
until
S000
~
S100
appears on the LED screen.
7. Press
<ENTER>
.
8. Using
<UP>
&
<DOWN>,
select the desired run speed (slow~fast)
9. Press
<ENTER>
.
Static Color
This fixture has preprogrammed, static looks that may be triggered without a controller. Access these
chases via the control panel on the back of the fixture.
Please see the instructions below for details on entering this mode.
1. Remove any DMX controller from the fixture.
2. Press
<MENU>
to select Static Color mode (
C--
).
3. Press
<ENTER>
.
4. Using
<UP>
&
<DOWN>,
select one of the seven presets.
5. Press
<ENTER>
.
Custom Static Color
This fixture has the ability to accept custom static color settings. Access this via the control panel.
Please see the instructions below for further explanation.
1. Press
<MENU>
until
U--
appears on the LED screen.
2. Press
<ENTER>
.
3. Using
<UP>
and
<DOWN>
, select the desired color.
4. Press
<ENTER>
.
5. Using
<UP>
and
<DOWN>
, select the desired color value (
000
~
100
). By selecting
000
,
the color will remain off.
6. Press
<ENTER>
to continue to the next color (
R, G, b
).
7. Using
<UP>
and
<DOWN>
, select the desired color value (
000
~
100
).
8. Continue until the desired mix is obtained. The order of colors is red, green, and blue.
9. Press
<ENTER>
to continue to the strobe setting.
10. Using
<UP>
and
<DOWN>
, select the desired strobe value (
000
~
100
). By selecting
000
,
the strobe function will remain off.
11. Press
<ENTER>
to save the final color setting. This will move the selection to the following
color. However, this is necessary to save the modification.