Page 4 of 18
SlimPANEL TRI 24 IP User Manual (Rev. 6)
Product at a
Glance
Use on Dimmer
x
Auto Programs
P
Outdoor Use
P
Auto-ranging Power Supply
P
Sound Activated
x
Replaceable Fuse
x
DMX
P
User Serviceable
x
Master/Slave
P
Duty Cycle
x
Safety Notes
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
•
Always connect the product to a GFI (ground fault interrupter) circuit to avoid the
risk of electrocution.
•
To eliminate wear and improve its lifespan, during periods of non-use completely
disconnect from power via breaker or by unplugging it.
•
Always disconnect the product from the power source before cleaning.
•
Avoid direct eye exposure to the light source while the product is on.
•
Make sure the power cord is not crimped or damaged.
•
Never disconnect the product from power cord by pulling or tugging on the cord.
•
If mounting the product overhead, always secure to a fastening device using a
safety cable.
•
Make sure there are no flammable materials close to the product when operating.
•
Do not touch the product’s housing when operating because it may be very hot.
•
Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
•
This product is for indoor or temporary outdoor use (
IP65
). Do not expose to harsh
or excessively corrosive environmental conditions (whether indoors or outdoors),
including, but not limited to, extreme temperatures, humidity, atmospheric
conditions (including salinity or pressure), radiation (UV, infrared or nuclear), shock
and conditions which exceed the product’s Ingress Protection (“IP”) rating. Do not
submerge this product.
•
Always install the product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
•
Be sure that no ventilation slots on the product’s housing are blocked.
•
Never connect the product to a dimmer.
•
Make sure to replace the fuse with another of the same type and rating.
•
Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
•
The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
•
In the event of a serious operating problem, stop using the product immediately.
•
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
Keep this User Manual for future consultation. If you sell the product to another
user, be sure that they also receive this document.
Содержание Slim PANEL TRI 24 IP
Страница 1: ...User Manual ...
Страница 6: ...Page 6 of 18 SlimPANEL TRI 24 IP User Manual Rev 6 Product Dimensions ...