Chauvet Satellite D-FI Скачать руководство пользователя

Страница: 10 / 16

3. Setup

12/28/2009 12:38 PM

DMX Fixture

Configuration #2

DMX Controller

DMX Fixture

Configuration #1

Receiver

Transmitter

DMX Fixture

Receiver

DMX Fixture

Receiver

Transmitter

D-Fi

™ PLUS/Satellite™ D-Fi Configuration Options

The Satellite™ D-Fi is fully compatible with the standalone D-Fi™ PLUS wireless DMX products.

DMX connection for the

Satellite™ D-Fi

There are both 3-pin and 5-pin DMX connection on the product. However, only one input and one output must
be used at any time.

Configurations

1. A transmitter is connected to the output of the controller, and a receiver is connected at the input of

the first DMX fixture.

2. A transmitter is connected to the output of a DMX fixture, and a receiver is connected to the input of

the next DMX fixture.

The following diagrams are to demonstrate possible configurations. Multiple receivers may be

used in any possible configuration.

Содержание Satellite D-FI

















Результаты поиска

Содержание Satellite D-FI

Отзывы:

Похожие инструкции для Satellite D-FI

Бренды по названию

Популярные бренды

Chauvet Satellite D-FI, Руководство пользователя

Результаты поиска

Содержание Satellite D-FI

Отзывы:

Похожие инструкции для Satellite D-FI

Бренды по названию

Популярные бренды