
Rogue™ R2 Spot QRG
EN
3
AC Power
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
Power Linking
You can link up to 5 Rogue™ R2 Spot products at 120 V, 8 products at 208 V, or
9 products at 230 V. Never exceed this number. Power linking cords can be
purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing The Fuse
1.
Disconnect this product from power.
2.
Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and rating.
4.
Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Rogue™ R2 Spot will work with a DMX controller using a 3- or 5-pin DMX
data connection. A DMX Primer is available from
www.chauvetprofessional.com
.
DMX Connection
The Rogue™ R2 Spot uses a 3- or 5-pin DMX data connection for its DMX
personalities:
18CH
and
21CH
. See the User Manual for information about
connecting and configuring the product for DMX operation.