background image

DMX Signal Levels

Sound Activated Mode

When dip switch SW #10 is on, the Patriot will be in sound activated mode. The light will cycle through
pre-programmed movements. If there is no sound for 20 seconds, the lamp will automatically black out.

Installation / Mounting

T

his unit has been designed to be properly mounted using a suitable hanging clamp and safety cable.

CHAUVET offers a range of items, which are ideal for safe mounting.  

Mount the Patriot (CH545X) in a well-ventilated area without obstruction to the fan to prevent damage
from overheating.

DMX512 control value

Remark

0-9

Black-out

10

Light On

11-30

Light On

31-99

Light On

100-105

Black-out

106-110

Light On

111-125

Light On

126-200

Light On

201-255

Sound-Activated

Static

Static

Clockwise Slow

Clockwise Fast

Counterclockwise Fast

Various

Rotating Direction

Static

Static

Counterclockwise Slow

Содержание Patriot CH-545X

Страница 1: ...rld wide Headquarters 3000 North 29th Ct Hollywood FL USA 33020 Tel 1 954 929 1115 Fax 1 954 929 5560 www ChauvetLighting com Patriot CH 545X User Guide Please read these instructions carefully before use ...

Страница 2: ... will also work in stand alone mode by sound activation To operate in DMX mode you must link the units together using a premium quality 3 pin DMX cable in the following configuration Out from the first unit to In on the second Out from the second unit to In on the third and so on The Patriot CH 545X is a single channel DMX fixture In order to activate the DMX mode DIP switch 10 must be in the OFF ...

Страница 3: ...table hanging clamp and safety cable CHAUVET offers a range of items which are ideal for safe mounting Mount the Patriot CH545X in a well ventilated area without obstruction to the fan to prevent damage from overheating DMX512 control value Remark 0 9 Black out 10 Light On 11 30 Light On 31 99 Light On 100 105 Black out 106 110 Light On 111 125 Light On 126 200 Light On 201 255 Sound Activated Sta...

Страница 4: ...tact your dealer or CHAUVET for servicing Replacing Fuses 1 Always disconnect the unit from main power supply before attempting to replace a lamp or fuse 2 Unscrew the fuse holder cover to reveal the fuse 3 Remove the old fuse 4 Place new fuse inside the holder Notes on fuses see below 5 Screw the fuse holder cover back on Notes on fuses This unit has a label attached which indicates the correct f...

Отзывы: