
Page 8 of 23
S
ETUP
Ovation P-56VW User Manual Rev. 4
Alternate Lens Changing Procedure
The Ovation P-56VW has the ability to have different types of lenses installed. The interchangeable lenses
allow the product to have alternate beam angles.
To remove the lens
1.
Pull knob up.
2.
Grab the tab on the lens, and pull it out of the fixture.
To install a lens
1.
Pull knob up.
2.
Insert the bottom of the lens at approximately the 5 o’clock position with the lens tab located at the
11 o’clock position.
3.
Push the top of the lens in and release the knob.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master.
The lens type is molded into the tab.
Pull knob up to release
and change the lens
Содержание Ovation P-56VW
Страница 1: ...User Manual...