O
PERATION
Ovation FD-205WW User Manual Rev. 1
Reset
To reset the Ovation FD-205WW to the factory default settings:
1.
Go to the
SETTING
main level.
2.
Select the
RESET
programming level and then the display becomes blank.
3.
Enter the passcode as described in
.
4.
“OK” appears on the display when finished.
Zoom - Options Control
The Ovation FD-205WW offers three zoom options during the operation of the OVATION FD-165WW. To
select from these option, do the following.
1.
Go to the
SETTING
main level.
2.
Select the
ZOOM
programming level.
3.
Choose from the following options:
a.
Select
BASE
for the default zoom position (full movement).
b.
Select
POS1
for the position 1 zoom range.
c.
Select
POS2
for the position 2 zoom range.
Setting Zoom Ranges
These settings allow you to select the zoom ranges for
POS1
and
POS2
during menu control of the zoom.
1.
Go to the
CALIBRATION
main level.
2.
Enter the passcode as described in
.
3.
Go to the
CALZ
programming level.
4.
Select
POSE1
(position 1) or
POSE2
(position 2).
5.
Select the desired maximum for the zoom
000–255
(0–100%).
6.
Repeat to select the other position setting.
Resetting the Zoom Motor
To reset the zoom motor, do the following.
1.
Go to the
MOTOR
main level.
2.
Select
YES
.
Zoom - Menu Control
To adjust the beam of the Ovation FD-205WW, select the zoom setting as follows:
1.
Go to the
STATIC
main level.
2.
Select
ZOOM
.
3.
Choose the desired zoom setting
000–100
.
Zoom - Manual Control
Manually adjust the zoom by using the zoom adjustment knob, as follows.
1.
Press the zoom adjustment knob above the display twice.
2.
Select the desired zoom setting
000–100
by turning the knob clockwise (value increases) or
counter-clockwise (value decreases)..
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the Ovation FD-
205WW.
1.
Go to the
SETTING
main level.
2.
Select the
PWM
programming level.
3.
Choose a PWM Frequency (
600Hz
,
1200Hz
,
2000Hz
,
4000Hz, 6000Hz
, or
25Khz
).
Note:
Selecting NO does not reset the zoom’s motor.
•
When using the zoom adjustment knob, the lowest zoom value stops at
000
and
the highest zoom value stops at
100
.
•
During manual zoom control, you can also use
<UP>
or
<DOWN>
, which will
cycle through all the zoom values.
Содержание OVATION FD-205WW
Страница 1: ...User Manual...