background image

 
 
 
 

Obsession™ LED 2.0 User Manual (Rev. 03) 

Page 3 of 20 

1.

 

B

EFORE 

Y

OU 

B

EGIN

 

 

 

What Is 

Included

 

  1 x Obsession™ LED 2.0 

  1 x Power Cord 

  1 x Warranty Card 

  1 x Quick Reference Guide 

 

 

Unpacking 

Instructions

 

Immediately upon receipt, carefully unpack this product and check the container to make 
sure you have received all the parts indicated above in good condition. 

 

 

Claims 

If the container or the material inside the container (this product and any other accessory 
included) appears damaged from shipping, or shows signs of mishandling, notify the 
carrier immediately, not CHAUVET®, upon receipt of the damaged merchandise. Failure 
to do so in a timely manner may invalidate your claim with the carrier. In addition, retain 
the container and all the packing material for inspection.  

For other issues such as missing components or parts, damage not related to shipping, 
or concealed damage, file a claim with CHAUVET® within seven (7) days of receiving 
the merchandise. 

 

 

Text 

Conventions

 

Convention 

Meaning 

1~512 

A range of values 

50/60 

A set of values of which only one can be chosen 

Settings 

A menu option not to be modified  

Menu > Settings 

A sequence of menu options to be followed 

<ENTER> 

A key to be pressed on the product’s control panel 

ON 

A value to be entered or selected 

 

 

Icons 

Icon 

Meaning 

 

This paragraph contains critical installation, configuration, or 
operation information. Failure to comply with this information may 
render the product partially or completely inoperative, cause 
damage to the product, or cause harm to the user. 

 

This paragraph contains important installation or configuration 
information. Failure to comply with this information may prevent 
the product from functioning correctly. 

 

This paragraph reminds you of useful, although not critical, 
information. 

 

 

Document 

Information

 

The information and specifications contained in this document are subject to change 
without notice. CHAUVET® assumes no responsibility or liability for any errors or 
omissions that may appear in this manual. CHAUVET® reserves the right to update the 
existing document or to create a new document to correct any errors or omissions. 

You can download the latest version of this document from www.chauvetlighting.com. 

© Copyright 2011 CHAUVET®. All rights reserved 

Electronically published by CHAUVET® in the United States of America 

 

 

 

Author 

Date 

Editor 

Date 

 

A. Diaz 

09/01/11 

B. Pillow 

09/02/11 

 

 

Содержание Obsession LED 2.0





















Отзывы: