MegaStrobe™ FX12 User Manual Rev. 2
Page 9 of 18
Mounting
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The MegaStrobe™ FX12 may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
•
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
•
Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see
Technical Specifications
).
•
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
•
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has 13-mm holes, which are appropriate
for this purpose.
•
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
•
The mounting bracket also allows for surface mounting. When mounting the product
on the floor, make sure that the product and cables are away from people and
vehicles.
Mounting Diagram
Bracket
Adjustment
Knobs
Hanging/Mounting
Bracket
Mounting Clamp
Safety Cable
