Chauvet Maverick MKII Spot, Руководство пользователя, Страница: 15 / 37

Operation
-12- Maverick MK2 Spot User Manual Rev. 4
Operating Settings Configuration
Home Screen
The Maverick MK2 Spot has a home screen that shows the protocol mode, the IP address or DMX
address, the DMX personality, and the current product temperature. To see the home screen, press
<MENU> repeatedly until it appears on the display.
Start Address
To set the starting address, set the Control Mode and then follow the instructions below:
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER> . 1.
Use <UP> , <DOWN> , <LEFT> , or <RIGHT> to select Start Address , or touch th display 2.
where it says Start Address .
If using the buttons instead of the touchscreen, press <ENTER> . 3.
Enter the starting address ( 001–512 ) with one of the following methods 4.
•
Type the address number using the number pad that shows on the ouchscreen display.
or
•
Using the buttons (or the button icons on the sides of the disp ay)
Use <LEFT> or <RIGHT> to select the digit to be altered. a.
Use <UP> or <DOWN> to increase or decrease the umber value of that digit. b.
Repeat until the address is set as desired. c.
Press <ENTER> . 5.
Network Setup
The universe of the TCP/IP protocol will be the uni erse of the DMX function.
Ethernet To DMX The Maverick MK2 Spot can convert a single et ernet input signal to a single DMX output signal.
To activate or deactivate the Ethernet to DMX function, do the following:
Press <MENU> repeatedly until the H me Screen shows on the display. Press <ENTER> . 1.
Use <UP> , <DOWN> , <LEFT> , or <RIGHT> to select Network Setup , or touch the display 2.
where it says Network Setup .
If using the buttons instead of t e touchscreen, press <ENTER> . 3.
Use <UP> or <DOWN> to s lect Ethernet to DMX , or touch the display where it says Ethernet 4.
to DMX .
If using the buttons nst ad of the touchscreen, press <ENTER> . 5.
Use <UP> , <DOWN> <LEFT> , or <RIGHT> to select NO (deactivate) or YES (activate), or 6.
touch the disp ay w ere it says the desired setting.
Press <ENTER 7.
IP Mode The IP address of the Maverick MK2 Spot can be set manually, by the network, or to a pre-set static
address spec fic to each product. To set the IP Mode, follow the instructions below:
Press MENU> repeatedly until the Home Screen shows on the display. Press <ENTER> . 1.
Use <UP> , <DOWN> , <LEFT> , or <RIGHT> to select Network Setup , or touch the display 2.
where it says Network Setup .
If using the buttons instead of the touchscreen, press <ENTER> . 3.
Use <UP> or <DOWN> to select IP Mode , or touch the display where it says IP Mode . 4.
If using the buttons instead of the touchscreen, press <ENTER> . 5.
Use <UP> , <DOWN> , <LEFT> , or <RIGHT> to select from: 6.
•
Manual (set the IP address with the control panel),
•
DHCP (the network sets the IP address),
or
•
Static (a pre-set address specific to each product),
or touch the display where it says the desired mode.
Press <ENTER> . 7.
www.carlosmendoza.com.mx