Chauvet Intimidator Spot 355 IRC, Руководство пользователя

Страница: 8 / 25

Page 8 of 25 Intimidator Spot 355 IRC User Manual Rev. 1
3. S
ETUP
AC Power
The Intimidator Spot 355 IRC has an auto-ranging power supply and it can work with an
input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating indicates the
product’s average current draw under normal conditions.
•
Always connect the product to a protected circuit (circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
•
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse
Replacement
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from
the housing.
3. Remove the blown fuse.
4. Replace with a fuse of the same type and rating.
5. Screw the fuse holder cap back in place and reconnect power.
•
Disconnect the product from power before replacing the fuse.
•
Always replace a blown fuse with another of the same type and rating.
Power Linking The product provides power linking via the IEC outlet located in the back of the unit.
Power Linking
Diagram
You can power link up to 4 Intimidator Spot 355 IRC units on 120 VAC or up to 7
Intimidator Spot 355 IRC units on 230 VAC.
The power linking diagram shown above corresponds to the North American
version of the product ONLY! If using the product in other markets, you must
consult with the local Chauvet distributor as power linking connectors and
requirements may differ in your country or region.
1
st
Product
2
nd
Product
3
rd
Product
Other products