Chauvet Hurricane Haze 3D Скачать руководство пользователя страница 4

 
 
 
 

Page 4 of 16 

Hurricane™ Haze 3D User Manual Rev. 1 

 

Product at a 

Glance 

Use on Dimmer 

x

 

Auto Programs 

x

 

Outdoor Use 

x

 

Auto-ranging Power Supply 

x

 

Sound-Activated 

x

 

Replaceable Fuse 

P

 

DMX 

P

 

User-Serviceable 

x

 

Master/Slave 

x

 

 

 

Safety Notes  

 

Please read the following Safety Notes carefully before working with the 

product. The Notes include important safety information about installation, 
usage, and maintenance. 

 

  Not intended for permanent installations. 

  Always connect the product to a grounded circuit to avoid the risk of electrocution. 

  Always disconnect this product from the power source before cleaning it or 

replacing the fuse. 

  Make sure the power cord is not crimped or damaged. 

  Never disconnect the power cord by pulling or tugging on the cord. 

  Do not touch the output nozzle on this product. It is very hot during operation and 

it may remain hot for several hours after turning the unit off. 

  If mounting this product overhead, always secure it to a fastening device using a 

safety cable. 

  Do not mount this product on a flammable surface (e.g., wood, linoleum, carton, 

plastic, or carpet). 

  Do not drink the haze fluid. If you do, call your local emergency service  

(911 in the US) for help. 

  Do not add perfume, alcohol, gasoline, or any other flammables to the haze fluid. 

 

  Always make sure that the voltage of the outlet to which you are connecting the 

product is within the range stated in the decal or rear panel of the product. 

  Keep this User Manual for future consultation. If you sell this product to another 

user, be sure that they also receive this document. 

  This product is for indoor use only! To prevent risk of fire or shock, do not expose 

this product to rain or moisture. 

  Make sure there are no flammable materials close to the unit while operating 

  Always install this product in a location with adequate ventilation, at least  

20 in (50 cm) from adjacent surfaces.  

 

  Be sure that no ventilation slots on the unit’s housing are blocked. 

  Make sure to replace the fuse with another of the same type and rating. 

  The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate this 

product at higher temperatures. 

  In the event of a serious operating problem, stop using the unit immediately. 

  Never try to repair this product. Repairs carried out by unskilled people can lead 

to damage or malfunction. Please contact the nearest authorized technical 
assistance center. 

  Never connect this product to a dimmer or rheostat. 

  Depending on the amount of haze generated, all haze machines may set off 

smoke detectors. 

  In certain environment, haze fluid-based machines may leave a slippery residue 

on floors and surfaces. 

  Do not use for space heating purposes. 

  Use only CHAUVET® DJ water-based haze fluid. 

  Drain the tank before transporting the product. 

  To eliminate unnecessary wear and improve its lifespan, during periods of non-

use completely disconnect the product from power via breaker or by unplugging it. 

 

FCQ (Fog Cleaner Quart) was  specifically developed by Chauvet  to clean your 
Hurricane™  Haze 3D.  Make sure you use FCQ regularly to  increase the life of 
your product. 

Содержание Hurricane Haze 3D

















Отзывы: