Hurricane Haze 1D User Manual Rev. 1
Page 11 of 16
Menu Map
Mode
Programming Steps
Description
HAZe
h 0~h 3
Output Low~High
Ht
H _ _ _
Shows current temperature
Addr
d 1~512
Selects the DMX starting address
Configuration
(DMX)
Set this product in DMX mode to control it with a DMX controller.
•
Connect this product to a suitable power outlet.
•
Turn this product on.
•
Connect a DMX cable from the DMX output of the DMX controller to the
DMX input socket of this product.
Starting
Address
The Hurricane Haze 1D has one DMX personality, a 1-channel mode for basic
control.
The Hurricane Haze 1D uses 1 channel in DMX mode, which defines the highest
configurable address to 512.
When selecting a starting DMX address, always consider the number of DMX
channels the selected DMX mode uses. If you choose a starting address that is too
high, you could restrict the access to some of the product’s channels.
If you are not familiar with the DMX protocol, download the
DMX Primer
from
To select the starting address, do the following:
1. Press
<MENU>
repeatedly until
d***
shows on the display.
2. Use
<UP>
or
<DOWN>
to select the starting address.
Configuration
(Standalone
Mode)
Set this product in one of the standalone modes to control it without a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
Manual Mode
Never connect a product that is operating in any standalone mode, whether
Static, Automatic, or Sound to a DMX string connected to a DMX controller.
Products in standalone mode may transmit DMX signals that could interfere
with the DMX signals from the controller.
To enable the Automatic Mode, follow the instructions below:
1. Press
<MENU>
repeatedly until
h***
shows on the display.
2. Use
<UP>
or
<DOWN>
to adjust the haze volume.
DMX Channel Assignments and Values
1-CH
Channel
Function
Value
Setting
1
Output
000
ó
255
Low~High
Содержание Hurricane Haze 1D
Страница 1: ...User Manual ...