Page 10 of 18
Hemisphere™ 5 User Manual (Rev. 02c)
Configuration (Standalone Modes)
Setting this product to operate in standalone mode will allow you to control it without a
DMX controller.
1) Connect this product to a suitable power outlet.
2) Turn this product on.
3) Select a standalone mode, as indicated in the next sections.
Never connect a fixture that is operating in any standalone mode, whether
Static, Automatic, or Sound to a DMX string already connected to a DMX
controller. This is because fixtures in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Automatic Programs
This fixture has 14 automatic programs, which you can select individually.
To select and enable an automatic program, follow the instructions below:
1) Press
<MENU>
repeatedly until
PR.XX
shows on the display.
2) Use
<UP>
or
<DOWN>
to select an automatic program, from
PR.01
to
PR.14
.
3) Press
<SETUP>
.
Automatic Sequence
This mode plays the 14 automatic programs in an endless sequence.
To activate the automatic sequence, follow the instructions below:
1) Press
<MENU>
repeatedly until
AUTO
shows on the display.
2) Press
<SETUP>
.
Sound Active Mode
The fixture has a pre-programmed chase that triggers with ambient sound.
To enable the Sound Active mode, do the following:
1) Press
<MENU>
repeatedly until
SOUN
shows on the display.
2) Turn the music on and adjust the microphone sensitivity knob until the fixture
starts reacting to the beat of the music.
The fixture will only respond to the low frequencies of the music (bass and
drums).
Static Color
In this mode, the fixture will rotate at a preset speed, although you will be able to
control the LED colors.
To enable the Static mode, do the following:
1) Press
<MENU>
repeatedly until
CL.XX
shows on the display.
2) Use
<UP>
or
<DOWN>
to select a static color combination (from
CL.R-
to
CL.FL
), as shown in the
Menu Map
(page 8).
3) Press
<SETUP>
.
The rotation speed is not adjustable in the Static Color mode.
Содержание Hemisphere 5
Страница 1: ...User Manual ...
