Chauvet Gobo Shot, Руководство пользователя

Страница: 10 / 18

Page 10 of 18 Gobo Shot™ 50W IRC User Manual Rev. 4
4. O
PERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display.
Button Function
<MENU> Selects an operation mode or backs out of the current menu option
<UP>
Scrolls up the list of options or selects a higher value
<DOWN> Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Menu Map Main Function Programming Levels Description
DMX Address d001—d512 Selects the DMX starting address
Manual Mode nAn
Gobo
StoP
Gobo rotation, stop
CU Gobo rotation
CCU Reverse gobo rotation
GoSP 000—255 Gobo rotation speed
diNN L000—L255
Dimmer (0—100%)
SHut S000—S100 Shutter (0—20 Hz)
Display diS
diS Normal display
rdiS Reverse display
Reset rESt
Resets fixture
Load LoAd Loads factory defaults
While in Manual mode (nAn), the Gobo Shot™ 50W IRC also responds to the IRC-6.
When using the IRC-6 in this mode, changes in programming levels and settings
will show on the display.
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The Gobo Shot™ 50W IRC uses up to 4 DMX channels in its 4-channel DMX mode,
which defines the highest configurable address to
509 .
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com .
To select the starting address, do the following:
1. Press <MENU> repeatedly until d001 — d512 shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER> .