Funfetti™ QRG
EN
5
Mounting
Before mounting this product, read the
Safety Notes
. Place launcher on a flat,
level surface using the double brackets provided or use a clamp to mount to
truss systems (such as TRUSST®). Always use at least one safety cable to
secure to rigging.
Ensure that the launcher is not shooting directly into anyone’s face or
above heavy traffic areas.
Mounting Diagram
When mounting overhead, be sure to point Funfetti™ at an upward
angle to keep the confetti from pouring out prior to launching.
AC Power
This product has a voltage-specific power supply that can work with an input
voltage of 120 VAC, 60 Hz or 230 VAC, 50 Hz.
Fuse Replacement
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the safety cap out of the housing.
4.
Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5.
Re-insert the fuse holder and reconnect power.
Disconnect the product from power before replacing the fuse.
Floor Mounting
Safety Cable
(such as
CH-05
from Chauvet)
Mounting Clamp
(such as the
CLP-15N
clamp from Chauvet)
Mo
Overhead Mounting
Содержание Funfetti
Страница 1: ...Quick Reference Guide...