Gobo 9 /Pink
Gobo 7 / Magenta
Gobo 5 / Orange
Gobo 3 / Yellow
Blackout
Gobo 1 / Multicolor
0
DMX512 CONFIGURATION
Channel 1
Gobo 11 / Orange
Gobo 13 / White
Gobo 14 / Green + Pink
Gobo 12 / Blue
Gobo 10 / Magenta
Gobo 2 / Blue
Gobo 4 / Green
Gobo 6 / Red
Gobo 8 / Light Blue
Open
Channel 2
Channel 3
Channel 5
Tilt
Pan
Gobo / Color
Shutter
8
16
24
32
40
48
56
64
72
80
88
96
104
112
120
128
255
0
255
10
121
Flat
Flat
Barrel
Barrel
Stopped
Stopped
Stopped
Channel 4
Reflector mirror
0
255
Stopped
Slowest speed
Fastest speed
15
Slow strobe
Fast strobe
Stopped
Stopped
246
Stopped
135
14
13
12
11
10
9
2
open
8
7
6
5
4
3
1
•
Start the address
How to address your DMX512 system:
1. Select the channels of DMX controller
2. Dipswitches
Dip
#1
#2
#3
#4
#5
#6
#7
#8
#9
Value
1
2
4
8
16
32
64
128
256
•
Examples:
Channel 01
：
dip / on : #1
（
=1
）
Channel 06
：
dip / on : #2, #3
（
2+4=6
）
Channel 11
：
dip / on : #1, #2,#4
（
1+2+8=11
）
Channel 16
：
dip / on : #5
（
=16
）
A. GENERAL INSTRUCTIONS
Please read the enclosed instructions carefully as they include important
points about safety for the installation, usage and maintenance of the unit.
•
Please keep this booklet with the unit for future consultation. If you sell the unit
to another user, be sure that the new user also receives this instruction booklet
thus giving them the necessary information about the use and general
warnings regarding the unit.
•
Before the initial start-up, please unpack and carefully check all components in
case any damage may have occurred during shipping.
•
Locate a suitable spot for your device where there is good ventilation. Also,
make sure that no ventilating fans or slots are blocked.
•
Protect our environment! Please dispose of the packing boxes properly.
•
The electrical work that is necessary for installation must done by qualified
personnel.
•
Always remember to unplug the unit from the main power before any service is
done. Do not open the unit. There are no serviceable parts inside.
•
It is very important to ground the yellow/green conductor to earth in order to
meet regulations for safety.
•
Check the surrounding area and make sure there are no flammable liquids, water
or metal objects that could enter the fixture. If a foreign object enters the unit,
immediately disconnect the main power. Also, place the fixture in a well-
ventilated room at about 15 cm from the walls.
•
Do not touch any wires during operation, as high voltage is hazardous.
•
In the event of serious operating problems, stop using the unit immediately.
Never try to repair the unit yourself. Repairs carried out by unqualified
personnel can lead to damage or malfunction. Please contact the nearest
authorized Technical Assistance Center. Always use genuine spare parts.
