Chauvet D-Fi, Руководство пользователя

Страница: 10 / 14

Page 10 of 14 D-Fi™ 2.4GHz User Manual (Rev. 04)
5. T
ECHNICAL
I
NFORMATION
General Troubleshooting
Symptom Possible Cause Possible Action
Product does not
power up

No energy on power outlet

Check power outlet

Change to another outlet

Loose or damaged power adapter

Check the power transformer

Internal problem

Send product for repair
Product does not
respond to DMX

Wrong starting address on the
product

Set the correct starting address on the
product

Use the right fader(s) on the controller

Wrong DMX personality on the
product

Set the correct DMX product’s
personality

Assign the faders accordingly

Wrong polarity setting on the DMX
controller

Change the signal polarity on the
controller

Loose or damaged DMX cable

Check the DMX cable before the faulty
unit

Internal problem

Send product for repair
Intermittent DMX
Problems

Signal cables are not DMX
compatible

Replace non DMX cables with true DMX
cables

Interference with AC or radio signals

Keep DMX cables away from AC wires
or radio equipment

DMX cable too long

Install an optically coupled DMX
amplifier right before the product with
intermittent problems

Too many products connected

Install an optically coupled DMX
amplifier after unit #32

Terminator not connected

Install a terminator, as indicated in the
DMX Primer section.
If you still experience problems after trying the above solutions, contact
CHAUVET® Technical Support.