COREpar™ 40 USB QRG
EN
4
Fresnel Lens
This Fresnel lens produces a very even light that is soft at the edges, which
makes the COREpar™ 40 USB a 2-in-1 light. Attach the Fresnel lens easily
with the built-in magnets.
WARNING! DO NOT plug anything other than a D-Fi™ USB into the
USB port. Doing so may cause damage to the product.
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz
.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Power Linking
For the maximum number of COREpar™ 40 USB that can be power linked at
120 V or at 240 V, see the User Manual or the label on the product.
Fuse Replacement
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the safety cap out of the housing.
4.
Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5.
Re-insert the fuse holder and reconnect power.
IRC-6
(Infrared
Remote Control)
The COREpar™ 40 USB is fully compatible with the Infrared Remote
Control (IRC-6) from Chauvet. For more information on the IRC-6 or to
download instructions, go to
Mounting
Before mounting this product, read the
Mounting
Diagram
Double-bracketed
Yoke for Floor or
Overhead Mounting
Bracket Adjustment Knob
Clamp
(such as the
CLP-15N
from
Chauvet)
Safety Cable
(such as
CH-05
from Chauvet)
Magnetic
Fresnel Lens
Содержание COREpar 40 USB
Страница 1: ...Quick Reference Guide...