LED-BAR User Manual
7
2005-11-22/09:18
DOWN
UP
MEN U
POWE R
O
PERATING
I
NSTRUCTIONS
The COLORbar
™
is a DMX-512 controllable, full RGB color mix multi-panel led fixture made up of
highly efficient and super bright leds. There are four led panels whose intensity can be controlled
either individually or together allowing the creation of an unlimited range of colors.
The COLORbar
™
can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing
between 5 and 17 channels.
Control Menu Functions
F
UNCTION
D
ESCRIPTION
CHA
DMX channel addressing
PAT
Programs # 0 ~ 9, program 0 is a multi-color chase program
1 ~ 9 are 2-color chases and allows user selection of CO1 and CO2 colors
CO1
Color Selection: Range 0 ~ 7, refer to Color Table, applies to PAT: 1-9
CO2
Color Selection: Range 0 ~ 7, refer to Color Table, applies to PAT: 1-9
SPE
Speed of chase: 1 ~ 127
S-C
Sound Active: ON = Sound, OFF = Auto
SS
Cross Fade: ON = Fade, OFF = No Fade
SLA
ON = Slave, OFF = Master ( ON is necessary for DMX control)
Color Tables
N
O
.
0
1
2
3
4
5
6
7
Color Blackout Red
Green
Blue
Yellow
Magenta Cyan
White
Applying changes to Functions
1. Press the [MENU] button repeatedly until the display
reads the menu function you wish to change.
2. Press the [DOWN] or [UP] buttons to toggle or scroll
through values that pertain to that function.
Master/Slave & Stand Alone Modes
The Master/Slave mode will allow you to link up to as many units you want in a daisy chain fashion. In
this mode, the first unit in the daisy chain will automatically command all other units following.
1. Connect all COLORbar
™
units in a daisy chain configuration as described in the section following.
2. Master Unit:
a. Press the [MENU] button until the display reads [
].
b. Use the [UP] or [DOWN] buttons to set the display to [
] for Master mode.
3. Slaves:
a. Press the [MENU] button until the display reads [
].
b. Use the [UP] or [DOWN] buttons to set the display to [
] for Slave mode.
(this should be the default setting)
4. You can also run the fixtures in an automatic stand-alone mode by simply setting all fixtures to run
as master units.
