Chauvet COLORado Batten Q15, Руководство пользователя, Страница: 29 / 33

Page 25 of 29
COLORado Batten Q15 User Manual Rev. 1
Operation
Dimmer Mode
This setting determines how fast the output of the COLORado Batten Q15 changes when you modify the
output value. This setting provides four different options to simulate the dimming curve of an incandescent
lighting product.
1. Go to the Dimmer Mode main level.
2. Select a dimmer curve ( OFF , DIM1 , DIM2 , DIM3 , or DIM4 ).
Pulse Width Modulation
To set the PWM frequency:
1. Go to the LED Frequency main level.
2. Select the frequency, from 1200Hz , 2000Hz , 2400Hz , 4000Hz , 6000Hz , or 25000Hz .
Cell Order
To set the cell order:
1. Go to the Cell Order main level.
2. Select the direction from 1 - 15(Left to Right) or 15 - 1(Right to Left) .
DMX Error/Loss
To select what happens when a DMX signal is lost:
1. Go to the Settings main level.
2. Enter the passcode ( <UP> , <DOWN> , <UP> , <DOWN> , <ENTER> ).
3. Select the DMX Error/Loss option.
4. Select from Hold Last (continues last command) or Blackout (blacks out).
Display Timeout
To set the duration of inactivity before the display turns off:
1. Go to the Settings main level.
2. Enter the passcode ( <UP> , <DOWN> , <UP> , <DOWN> , <ENTER> ).
3. Select the Disp TimeOut option.
4. Select from On (display always on), 10s (10 seconds), 20s (20 seconds), or 30s (30 seconds).
Display Passcode
To enable or disable to passcode lock:
1. Go to the Settings main level.
2. Enter the passcode ( <UP> , <DOWN> , <UP> , <DOWN> , <ENTER> ).
3. Select the Disp Passcode option.
4. Select from On (display locked) or Off (display unlocked).
Product Information
To view the product information:
1. Go to the Information main level.
2. Select from Fixture Hours , Firmware Version , or RDM .
Factory Reset
To reset the product to factory default settings:
1. Go to the Factory Reset main level.
2. Select from No (do not reset) or Yes (reset the product).
3. Enter the passcode ( <UP> , <DOWN> , <UP> , <DOWN> , <ENTER> ).
OFF : The output is proportional (linear) to the dimmer channel value.
DIM1-4 : The output follows the dimmer value based on the corresponding dimmer curve, DIM1
being the fastest.