
COLORado™ Batten 72 Tour QRG
EN
3
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
Power Linking
You can link up to 11 COLORado™ Batten 72 Tour products at 120 V,
19 products at 208 V, or 21 products at 230 V. Never exceed this number.
Power linking cords can be purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
1.
Disconnect this product from power.
2.
Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and
rating.
4.
Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The COLORado™ Batten 72 Tour will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
DMX Connection
The COLORado™ Batten 72 Tour uses a regular DMX data connection for its
DMX personalities:
TR16
,
TOUR
,
BLOCK1
,
BLOCK2
,
ARC1
,
AR1+D
,
ARC2
,
AR2+D
,
AR2+S
and
HSV
. See the User Manual to connect and
configure for DMX operation.
Master/Slave
Connection
The COLORado™ Batten 72 Tour uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.